Alfa Robots
|
|
|
|
Speed of operation,
accurate handling of parts and minimum investment is required for all
moulding machines, and the Titan series of high-speed servo-driven
large beam robots provide for this for moulding machines from 450 to
5000 ton. Telescopic vertical strokes of 1300 up to 3000mm are
supplied as standard.
|
|
|
|
Performance,speed,
stability and durability are all key attributes of the Phoenix series
of swing arm robots. They are ideally suited for sprue separation and
parts removal on moulding machines from 50 to 400 tons. The Phoenix
series has single stage vertical strokes of 550 and 650mm, and
vertical strokes from 650 to 950mm.
|
|
|
|
The Falcon series of
super-high-speed servo-driven side entry robots particularly designed
for applications where cycle times are very short and conventional
robot access is too slow. Their configuration also makes them suitable
when there are head height restrictions. The Falcon series covers
moulding machines from 50 to 350 ton and provides, as standard,
telescopic side-entry strokes of 900 and 1500mm.
|
|
|
|
The Cobra series of
pneumatic/inverter-driven large beam robots provides a versatile
solution for simultaneous parts removal on moulding machines from 400
ton to 4000 ton. Telescopic vertical strokes of 1300 up to 2500mm are
supplied as standard with remote adjustment of position and stroke on
the crosswise axis included as standard.
|
|
|
|
Fast,efficient and
economical parts handling. The Bomarc series of pneumatic / inverter
driven beam robots provides a versatile solution for simultaneous
parts removable on moulding machines from 50 to 550 tons. Standard
models have single-stage vertical strokes of 600mm up to 1100mm,
telescopic vertical strokes are also available as an optional extra.
|
|
|
|
Fast and efficient
parts handling at truly competitive prices. The Atlas series of full
pneumatic beam robots are designed to provide cost-effective,
simultaneous parts removal in applications where traverse strokes of
less than 1000mm are required. With single-stage vertical stroke of
550 and 650mm they are suitable for moulding machines from 50 to 200
tonnes.
|
|
|
|
Speed and accuracy
but with low investment cost are prime features of the Redstone series
of high-speed full-servo-driven beam robots. Designed for the precise
removal and accurate placing of parts on moulding machines from 50 to
550 tonnesvthe Redstone has telescopic vertical strokes of 700 up to
1100mm installed as standard.
|
|
|
|
|
